Identify Pool Equipment
- Thread starter mcbauder
- Start date
- Apr 10, 2018
- 6,455
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
They appear to be intake/suction covers for some type of a water feature/waterfall. If so, it's a single line split into two to comply with VGB Act anti-entrapment requirements.
Think they could be main drains? I do not have the traditional drain in the bottom etc?
- Apr 10, 2018
- 6,455
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Could be, but not all pools have main drains. Do you have any water features? Kinda hard to tell from the photos, but are they drain covers?
I don’t. Probably stupid question but how do I tell if they are drain covers?
mc,
Please show us several pics of your equipment pad.. That will help us provide you with better answers..
I can't tell in the pics.. Are they solid or are they "screen" like??
Thanks,
Jim R.
Please show us several pics of your equipment pad.. That will help us provide you with better answers..
I can't tell in the pics.. Are they solid or are they "screen" like??
Thanks,
Jim R.
- Apr 10, 2018
- 6,455
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
That's not a stupid question. Most likely my question was stupid.
Do they allow water to flow through?
Do they allow water to flow through?
Turn the pump on. Is water coming out of them? They have been used as a return fitting in some cases. Put a small amount of food coloring as a dye in front of them. Does it get pulled in?
Those are AquaStar "Hockey Puck" covers.
AquaStar 6 Inch Hockey Puck Suction Outlet Cover with Screws 6HP101
This is a 6 inch Hockey Puck Sumpless Suction Outlet Cover in white and it comes with screws. (This item is also known under part 6HPHA101.) The AquaStar line of suction outlet covers is compliant with the new Virginia Graeme-Baker Pool and Spa Safety Act (ASME/ANSI A112.19.8-2007). They are...
www.poolweb.com
Appreciate all the info. Looks like they are neither pulling or pushing water. Maybe they were installed when pool was built for future upgrades etc? No need to spend more time on this topic since they look to be inactive. Thanks!
Similar threads
