- Jun 4, 2007
- 233
- Pool Size
- 12200
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
When I was specifying equipment I took the advice to upsize the SWG. So I upsized to an IC40.
I currently have output set at 2% and the Intelliflo is set at 1650 RPM, which is the minimum to keep the SWG from throwing a flow error. My free chlorine is still at 9.
I have the pump running 24/7. Just changed it to 6 am - 11 pm - we'll see what that does. I suppose I could leave it running 24/7 and set only the SWG to run part of the time, if I could figure out how to do that on the EasyTouch.
I currently have output set at 2% and the Intelliflo is set at 1650 RPM, which is the minimum to keep the SWG from throwing a flow error. My free chlorine is still at 9.
I have the pump running 24/7. Just changed it to 6 am - 11 pm - we'll see what that does. I suppose I could leave it running 24/7 and set only the SWG to run part of the time, if I could figure out how to do that on the EasyTouch.