most of the documents I've found online seem to indicate I need a 10A/250V fuse, however all of the ones I can find locally are only rated for 32V. is that a problem? I can't find anything online that will get here before late next week, and I'd rather not have to keep dumping chlorine into the pool in the meanwhile...
ic40 fuse voltage
- Thread starter crackers8199
- Start date
- Jul 21, 2013
- 65,157
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You want a AG3, slow blow, 10 amp, 250vac (. 25 inch x 1.25 inch or 6.35mm x 31.75mm)
You can try the 32V fuse if it fits if it is 10amps. Worst case it will blow prematurely. I would replace it with the correct fuse when you get it.
Pack of 5, 6X30mm (1/4" x 1-1/4") 10A 250V Glass Slow-Blow (Time Delay) Fuses, 10A, 10, 10 amp 250v 10A, T10a: Cartridge Fuses: Amazon.com: Tools & Home Improvement
Pack of 5, 6X30mm (1/4" x 1-1/4") 10A 250V Glass Slow-Blow (Time Delay) Fuses, 10A, 10, 10 amp 250v 10A, T10a: Cartridge Fuses: Amazon.com: Tools & Home Improvement
www.amazon.com
You can try the 32V fuse if it fits if it is 10amps. Worst case it will blow prematurely. I would replace it with the correct fuse when you get it.
yeah, those are the ones i saw on amazon. every other iteration on amazon all are about a week out, unless i buy a kit with a bunch of other fuse options that i don't want or need. home depot and ace locally both have 10 amp slow blow in stock, but they're only rated at 32v.
does it have to be glass or is ceramic ok? amazon has some ceramic ones that can be here tomorrow.
- Jul 21, 2013
- 65,157
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
interestingly enough, the first review on that particular amazon link indicates those fuses are also 32V (and that they will keep blowing). i guess i'm stuck trying to find a 250V version and using liquid chlorine in the meanwhile...ugh.
i ended up ordering the witronics fuses from amazon that were linked above, and they were correct at 250V (not 32V as the previously mentioned review from amazon indicated). they arrived today, i put one in place, and i'm back in business. also, on the plus side, i now have four backups if it blows again.