How to adjust auto fill? Seems like it’s stuck

[EndlessSummerAZ]

How can I adjust the auto fill in the picture? I tried turning in the direction of the arrows but it seems like they are stuck and don’t want to rotate. The waterline is below where it should be and I don’t hear the auto fill running. When the start up company came out it had rained the day prior and the pool was a little fuller than it should be so I think they might have set it too high so it isn’t filling as needed.

 

[ajw22]

Looks like it should rotate.

Why not call the Pool Builder about it?

 

[EndlessSummerAZ]

PB wasn’t great. Got it to adjust. Raised the float up but still doesn’t seem to be turning on even though water level is low. I guess a call will be in order.

 

[ajw22]

Check that a valve in the water line to the leveler is not closed.

 

[W.J.Christy]

That's a paralevel autofill and it looks like its maxed out. If you can rotate the gray float to the left, you may get a little bit more height out of it. If the water level is to low you can get an extension kit but they are a bit hard to find. I got mine from AZ pools.

Paramount Paralevel Float Extender 1"

<p><span style="font-size: medium;">This float extender by Paramount is available in 1 inch or 2 inch size and is for the Paralevel water leveler</span></p> <p><span style="font-size: medium;">1 inch Extender:<strong> 005-761-2934-00</strong> / <strong>005761293400</strong></span></p> <p><span...

www.azpoolsupplies.com