Just had a new pool installed. My builder having issues getting my 90 degree corners on the deep end tight. I understand it will never be a 90 degree, but I have at least 3 inches behind each corner. This seems un acceptable. The print for the liner dimensions show 15'9" on length, I am measuring its 16' physically. My next issue is the sun shelf/steps. The physical dimensions on the print are correct, but the liner is 3" shorter if going by the seam dimensions. So I get the liner companies allow for stretch, but 3"?? The water is so shallow on the step, how could it stretch 3"? So I have 2 issues, sounds like builder screwed up the dimensions on the deep end corners, and the liner company screwed up on the sun shelf. Looking for some input...Thanks
How much smaller should the vinyl liner be from actual dimensions?
- Thread starter suzook
- Start date
- Jul 21, 2013
- 66,208
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Below are prior threads about liner stretch.
Expecting a 3" stretch sounds like a stretch.
What do your builder and liner company say about the fit?
www.troublefreepool.com
Expecting a 3" stretch sounds like a stretch.
What do your builder and liner company say about the fit?
Google search results
www.troublefreepool.com