How Much Reagents Needed

nymickey

Well-known member
May 22, 2013
46
Marietta, GA
Pool Size
15000
Surface
Fiberglass
Chlorine
Salt Water Generator
SWG Type
Hayward Turbo Cell (T-CELL-5)
So I just bought my K-2006 and now I know why the 2006C version was a little more.

Anyway, as you all know, the kit came with the below reagents. My question is ... which one(s) will run out first as I want to order extras to make sure I never run out.

R-0003
R-0871
R-0004
R-0005
R-0006
R-0007
R-0008
R-0009
R-0010
R-0011L
R-0012
R-0013
R-0870
 
Don't feel too bad, the K2006C had way too many CH/TA tests and not enough FC tests. You're replacing some of the kit early and throwing out the rest.

Do yourself a favor next time and order from TFtestkits.net. The TF100 comes with 2.7X the supplies of the K2006 for the same price. The TFPro has better supply amounts for how we test, plus a $44 stirrer, plus a fancy case, at the same price as the K2006C. Both TF kits are no brainers in comparison.

Anywho, order more FC drops (0871) because you'll use them the most and definitely run out. The rest will get you by for a while and you'll have some warning that you need more when the time is near.
 
  • Like
Reactions: SpaWife
Don't feel too bad, the K2006C had way too many CH/TA tests and not enough FC tests. You're replacing some of the kit early and throwing out the rest.

Do yourself a favor next time and order from TFtestkits.net. The TF100 comes with 2.7X the supplies of the K2006 for the same price. The TFPro has better supply amounts for how we test, plus a $44 stirrer, plus a fancy case, at the same price as the K2006C. Both TF kits are no brainers in comparison.

Anywho, order more FC drops (0871) because you'll use them the most and definitely run out. The rest will get you by for a while and you'll have some warning that you need more when the time is near.
Thanks!
 
  • Like
Reactions: Newdude
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.