I'm probably a total idiot for asking this question, but how to I heat up my spa? My setup is an inground spa and swimming pool with heat pump and propane tanks. Normal operation is the water spills over from the spa into the pool and comes back into the spa again. Pool suction is on which circulates the water from the pool to the spa, then spills back over into the pool. It's obvious how to operate the heat pump as the HMI is straight forward, but I'm not sure about the valves.
I guess the spa suction sucks water from the bottom of the spa and the spa return pumps it back in. I'm just not sure how to configure everything. My pump has multiple speeds.
A picture is attached. Any help would be highly appreciated.
I guess the spa suction sucks water from the bottom of the spa and the spa return pumps it back in. I'm just not sure how to configure everything. My pump has multiple speeds.
A picture is attached. Any help would be highly appreciated.