- Sep 15, 2018
- 938
- Pool Size
- 17000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
Our Aquarite doesn't seem to be generating as much chlorine as it had been. Diagnostic menu reads
+24.82V +6.21 A
85F 2800 PPM
We just cleaned it on Saturday for the first time, per the "every three months" instructions. Is is possible we created a "bad wire" situation? I've been running it a LOT at 90% (overnight and most of the day today) and it's only up to 2.5ppm FC (.2CC). I tested it yesterday after a bunch of folks in the pool on Sunday, and it was 1 ppm. Since everything looks ok, I haven't added any liquid chlorine yet - the FC is slowly rising, and I'd like to figure out how much I really have to run it and at what percentage.
This is way less than BEFORE I added CYA a few weeks ago.
Any suggestions welcome.
+24.82V +6.21 A
85F 2800 PPM
We just cleaned it on Saturday for the first time, per the "every three months" instructions. Is is possible we created a "bad wire" situation? I've been running it a LOT at 90% (overnight and most of the day today) and it's only up to 2.5ppm FC (.2CC). I tested it yesterday after a bunch of folks in the pool on Sunday, and it was 1 ppm. Since everything looks ok, I haven't added any liquid chlorine yet - the FC is slowly rising, and I'd like to figure out how much I really have to run it and at what percentage.
This is way less than BEFORE I added CYA a few weeks ago.
Any suggestions welcome.