Hi @drglanton. We live in the Covington, Ga area and noticed you live in Atlanta. We purchased the hotspot energy pool heater and need someone to come out and finish our install. Can you recommend anyone that could help us? Thanks.
Hotspot energy pool heater
- Thread starter tjmadd7
- Start date
- Jul 21, 2013
- 52,830
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
You say you "need someone to come out and finish our install". How far have you gotten?
You say you "need someone to come out and finish our install". How far have you gotten?
Hi the installation is actually complete but the system would not stay on long. We were told it was because the retainer we had was not large enough so we purchased a larger retainer. We need someone to switch the retainer out so we can see if it really works.
- Jul 21, 2013
- 52,830
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Hi thanks for responding. We finally got someone to finish the install and it is working, however we are now trying to figure out how to automate the filter pump so it come’s on when the FPH system starts. We have the.Hayward Aqua Plus PL-PLUS.
We have the Aqua Plus. Yes, they sent us a diagram showing it sending the signal through the solar sensor.
@tjmadd7 or @drglanton Any installer you can recommend in the atlanta area?
I'm new to the TFP club and new pool owner. I purchased a Hotspot pool heater and keep failing with finding HVAC companies to take the job.
I'm new to the TFP club and new pool owner. I purchased a Hotspot pool heater and keep failing with finding HVAC companies to take the job.
See below for nameplate on AC unit and then outdoor Trane condenser. Hope this helps!
