When I turn on my cleaner, it is causing the hose to come loose from the quick connect near the wall....see pic below. Any suggestions?
Hose pops off
- Thread starter tshepball
- Start date
That should be a solid piece. Probably need a new part.
Zodiac UWF Connector Assembly (9-100-9001) - INYOPools.com
The Universal Wall Fitting has two protrusions that go into channels in the main body and lock the main body in place. Sometimes the protrusions or the channels get damaged and don't lock properly.
Zodiac UWF Connector Assembly (9-100-9001) - INYOPools.com
The Universal Wall Fitting has two protrusions that go into channels in the main body and lock the main body in place. Sometimes the protrusions or the channels get damaged and don't lock properly.
Thanks....I will call Polaris tomorrow since our pool was just completed less than 2 months ago.
Put some lube on the oring and make sure that the nubs lock in by twisting 1/4 turn clockwise.
There is not an O ring where this piece is separating....I contacted Polaris this morning, and they will be shipping out a new part as well as pressure relief valve in case this was the cause of the part coming apart. Great customer service provided by Jeremy at Polaris. He said this was not supposed to come apart at this location.
