Hoping and praying I don’t have a leak in brand new pool

SunnyP2000

Bronze Supporter
LifeTime Supporter
Jul 8, 2013
317
Long Island, NY
Pool Size
17280
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite Pro (T-15)
So I have brand new in ground pool put in about 2 months ago. Patio is almost finished and I am noticing lot of bubbles coming out of returns and also lot of bubbles in pump. Trying to troubleshoot and found out when I move the valve over to main drain side and close skimmer NO Bubbles. I have totem silver screws on cable but still having bubbles. What else can I check ? one thing i would like to add i havent really noticed any water loss. atleast nothing major then minor evaporation.
 

Attachments

  • C01B8F4A-01E6-467C-A434-1E7E7DCC040E.jpeg
    C01B8F4A-01E6-467C-A434-1E7E7DCC040E.jpeg
    350.7 KB · Views: 18
how high is your water in the skimmer? Open up the skimmer and look at the water.. does it look like a tornado in the skimmer, if so you are pulling air into your pump... the water should be flat and no air being sucked into the skimmer.. if it is pulling air, fill the pool with more water... :)
 
how high is your water in the skimmer? Open up the skimmer and look at the water.. does it look like a tornado in the skimmer, if so you are pulling air into your pump... the water should be flat and no air being sucked into the skimmer.. if it is pulling air, fill the pool with more water... :)
water is pretty high. Had lot of rain and no tornadoe
 

Attachments

  • 01FCF1BD-C4D8-426F-B7D3-1DD041CEF3B6.jpeg
    01FCF1BD-C4D8-426F-B7D3-1DD041CEF3B6.jpeg
    285.6 KB · Views: 18
  • D66D2C20-889B-4668-B2FA-3B541A9E28A7.jpeg
    D66D2C20-889B-4668-B2FA-3B541A9E28A7.jpeg
    413.9 KB · Views: 18
well that is not it... now you have to do the hard part.. :(

 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.