So My question is or trouble I should start as
My PH consistantly in one day jumps to 8.2 and higher. I have a SWG and my spa runs off the same pump. Unfortunately the spa comes with a overflow waterfall, which I keep the valve at the lowest setting just to keep it chlorinated.
My question is, can I just keep a lower CH and Lower TA to keep my CSI under a .6. What numbers can I play with to offset the high PH. Otherwise I'm putting about 40-50 oz a day to maintain 7.5.
I just bought a 50# bag of snow joe melt but will wait to see what's better.
I was a victim in the houston area and my CH dropped so I wanted to see what's best before adding.
FC=7
PH=8.3
TA=85
CH=200
CYA=60
Salt=3200
CSI=.46
Thanks in advance
My PH consistantly in one day jumps to 8.2 and higher. I have a SWG and my spa runs off the same pump. Unfortunately the spa comes with a overflow waterfall, which I keep the valve at the lowest setting just to keep it chlorinated.
My question is, can I just keep a lower CH and Lower TA to keep my CSI under a .6. What numbers can I play with to offset the high PH. Otherwise I'm putting about 40-50 oz a day to maintain 7.5.
I just bought a 50# bag of snow joe melt but will wait to see what's better.
I was a victim in the houston area and my CH dropped so I wanted to see what's best before adding.
FC=7
PH=8.3
TA=85
CH=200
CYA=60
Salt=3200
CSI=.46
Thanks in advance