- Apr 7, 2025
- 17
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Solaxx (Saltron) Reliant / Purechlor R4
Hey everyone. So I finally got my kit and got my subscription to pool math. I have my numbers in order but I have a minor snag.
My pool manufacturer wants 1ppm fc for the shell. I had it running high like 4s and had some bleaching so I'm trying to get it down. Here's my dilemma: my swg is a saltron reliant 25k that was reprogrammed for a 15k unit, my pool is only a 6k pool. I've noticed that a daily check of Chlorine is showing at 8 hours a day on the lowest setting I'm over producing 1ppm fc. Not running it for a day drops it 1ppm FC. So I'm running at the lowest setting for 4 hours a day until it's being used more will keep it at the ideal level (I'm aimimg for 2 because 1 seems low to me). Now a 6k pool, with a 3/4 hp single stage pump running for only 4 hours a day..... am I turning over the water long enough? I plan on getting another system when this one dies but for now it's what I have. Thanks everyone
My pool manufacturer wants 1ppm fc for the shell. I had it running high like 4s and had some bleaching so I'm trying to get it down. Here's my dilemma: my swg is a saltron reliant 25k that was reprogrammed for a 15k unit, my pool is only a 6k pool. I've noticed that a daily check of Chlorine is showing at 8 hours a day on the lowest setting I'm over producing 1ppm fc. Not running it for a day drops it 1ppm FC. So I'm running at the lowest setting for 4 hours a day until it's being used more will keep it at the ideal level (I'm aimimg for 2 because 1 seems low to me). Now a 6k pool, with a 3/4 hp single stage pump running for only 4 hours a day..... am I turning over the water long enough? I plan on getting another system when this one dies but for now it's what I have. Thanks everyone