Help with cracked thread on pipe

[HermanTX]

I stopped using my in-line chlorinator several years ago and I plugged the side port on the main body tee. Well today I noticed a slight drip. I removed the plug and noticed a small crack. See photo. I slowly screwed a new plug in and noticed the crack expand. I need to think through how to remove it and put in a new straight pipe. So I am looking for a temporary fix.
I did put some adhesive product on it and it doesn’t drip at low speed , 2000 rpm. It does drip slightly when the pump primes. Any guidance appreciated.

 

[Newdude]

Who else grossly misread the title ?

For a temp fix, how about JB Weld and a small pipe clamp to stop it from possibly blowing apart. It looks like you have good drainage when it drips a little.

 

[HermanTX]

Who else grossly misread the title ?

For a temp fix, how about JB Weld and a small pipe clamp to stop it from possibly blowing apart. It looks like you have good drainage when it drips a little.

Thanks for suggestion.
PS - I fixed the title.

 

[Newdude]

WAY better.

 

[HermanTX]

I used JB Weld Plastic Bonder to repair the crack on the thread. I have monitored for several days and all is good.
I will replace the pipe in near future.