Hello all, I’ve included all pertinent info in my signature. Few questions.
FlowVis meter is where I’m getting my GPM. Below is my current schedule. I’m new enough to this pool stuff that I’m unsure of whether the pool needs to be turned over 1x or 1.5x, thoughts/recommendations are appreciated, thank you.
Program 1 - 0700-1100 2,850 (54 gpm = 12,960)
Program 2 - 1100-1900 2,350 (42 gpm = 20,160)
Program 3 - 1800-2100 1,850 (30 gpm = 5,400)
38,520 gallon turnover
Quick Clean (2,850) = 54 GPM x 12 hours = 38,880 gallons
Second,
last year we replaced the filter media from sand to glass (product specifics in signature) as well as replaced the knob assembly, within the last two weeks, when I backwash/rinse the hose out to the front of my property, I can see traces of the filter media on the street, not a lot, but definitely signs of it. What am I to make of this?
FlowVis meter is where I’m getting my GPM. Below is my current schedule. I’m new enough to this pool stuff that I’m unsure of whether the pool needs to be turned over 1x or 1.5x, thoughts/recommendations are appreciated, thank you.
Program 1 - 0700-1100 2,850 (54 gpm = 12,960)
Program 2 - 1100-1900 2,350 (42 gpm = 20,160)
Program 3 - 1800-2100 1,850 (30 gpm = 5,400)
38,520 gallon turnover
Quick Clean (2,850) = 54 GPM x 12 hours = 38,880 gallons
Second,
last year we replaced the filter media from sand to glass (product specifics in signature) as well as replaced the knob assembly, within the last two weeks, when I backwash/rinse the hose out to the front of my property, I can see traces of the filter media on the street, not a lot, but definitely signs of it. What am I to make of this?