- May 3, 2014
- 62,689
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
HELP- New owner, I must be doing something wrong
- Thread starter NewPoolOwner#7
- Start date
Copper turns blonde hair green and can leave blackish staining on pool surfaces, like a ring around the perimeter water line, and black lines around your skimmer, stains on the pool finish and fiberglass steps...
Well I will hold off on that for a while, if I had gotten to draining it earlier today, we just got almost 10 inches of rain. Coulda saved on my water bill
Alright. Lowered CyA with water replacement.
Here are are current results.
CyA - 50
PH - 7.5
Cl - 0 still
TA - 100
CH is up at 550 but I’m not convinced I did the test right
can you guys confirm what the pool math calculator is saying.
4 gallons bleach or 3lbs 11oz tricolor (I think that’s the extra blue). To raise FC to 20
im not sure what else to do to SLAM it though
Here are are current results.
CyA - 50
PH - 7.5
Cl - 0 still
TA - 100
CH is up at 550 but I’m not convinced I did the test right
can you guys confirm what the pool math calculator is saying.
4 gallons bleach or 3lbs 11oz tricolor (I think that’s the extra blue). To raise FC to 20
im not sure what else to do to SLAM it though
- May 3, 2014
- 62,689
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
You don't say what bleach concentration you have.
I come up with 313 oz of 10% liquid chlorine to raise to 20 ppm. You then will test FC and dose back to 20 ppm every hour or so start.
You cannot, and should not, use solid chlorine to SLAM Process
I come up with 313 oz of 10% liquid chlorine to raise to 20 ppm. You then will test FC and dose back to 20 ppm every hour or so start.
You cannot, and should not, use solid chlorine to SLAM Process
Marty is right, do not use anything other than liquid chlorine aka bleach - use the PoolMath link and enter in the % strength to determine how much.
Ignore the hardness test for now.
Focus on getting your chlorine level up. That's the main aspect of SLAM - raising your FC level up to your shock level and holding it there. Does this make sense?
Ignore the hardness test for now.
Focus on getting your chlorine level up. That's the main aspect of SLAM - raising your FC level up to your shock level and holding it there. Does this make sense?
It does, I have to go buy the bleach tomorrow so I will adjust before purchase to make sure. I’m still moving in too so wife pulled me away tonight to instal some curtains and rebuild a vanity so I couldn’t get to the store in time tonight.