*HELP* First time SLAM / Newbie pool owner SLAM confusion

Its fine, we can go either way. pH will rise on its own, now that we got TA up. You have two choices,
1) Start the slam.
2) Let FC come down below 10, then raise pH in .4 increments until you get to 7.4., then start the slam. Either is ok.

'Twer it my pool, and has a vinyl liner, I'd get the pH up...
Ok I want to make sure it's done properly , I will let FC come down under 10, test for pH and gradually increase to 7.4.

After adding 20 mule how long should I wait before retesting the pH?

And how do I determine how much more I need with the r006?
 
30 minutes, pump running, brush around a bunch. Do it in .4 increments. The r006 just gives me a sense for how low your pH could be. We are on right track, just raise pH in .4 increments...
 
  • Like
Reactions: saltygunz
SLAM ON!!!!!!!
Id say the pH looks more like 7.2 but yea go ahead and SLAM.
I cant thank you all enough! Thank you so much for you assistance!

I believe i am done with my SLAM
This morning passed the OCLT with 0 FC loss over night

I have 0 CC

And the water is clear

Safe to assume im good to go?

Currently letting FC come down to 5 then test TA and pH to ensure those are good

Added photos for comparison beginning and end. Took 6 days.
 

Attachments

  • IMG_9138.jpeg
    IMG_9138.jpeg
    451.8 KB · Views: 10
  • IMG_9062.jpeg
    IMG_9062.jpeg
    475.9 KB · Views: 10
I cant thank you all enough! Thank you so much for you assistance!

I believe i am done with my SLAM
This morning passed the OCLT with 0 FC loss over night

I have 0 CC

And the water is clear

Safe to assume im good to go?

Currently letting FC come down to 5 then test TA and pH to ensure those are good

Added photos for comparison beginning and end. Took 6 days.
Nice.

But check your CYA again and make sure the FC level will be ok.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.