Just bought the coleman 18x48 steel frame vinyl pool, leveled the ground best I could, added about 1" of sand as a cushion, vinyl protective liner on top of that, then set the pool up....filled pool in about 14 hrs, level is not perfect, about an inch off...no big deal...but here is my issue....the day after filling, we got 2-3 inch rain, really softened the ground and some of my legs are sinking in...no, I didnt use any type of footings as I was afraid as the vinyl liner might expand and rub and cause it to leak or break...so how do I re level, or support these legs without completely starting over...tia
hello from texas
- Thread starter Rgut3
- Start date
- Jun 22, 2014
- 52,051
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
Since this is an intro forum, you might want to start a new thread in the forum below. But in short, if the posts are sinking you'll need to empty water and get them on a good/solid base. 
It's a safety issue. If you make another thread, post some pics over there and we'll help you where we can.
www.troublefreepool.com
Since this is an intro forum, you might want to start a new thread in the forum below. But in short, if the posts are sinking you'll need to empty water and get them on a good/solid base. It's a safety issue. If you make another thread, post some pics over there and we'll help you where we can.Above Ground Pools
Special issues with operating and maintaining both permanent and seasonal above ground pools.
www.troublefreepool.com
kewl....will do....thanksWelcome to TFP!
Above Ground Pools
Special issues with operating and maintaining both permanent and seasonal above ground pools.