I'm hoping this site can help guide me on programming a new Jandy Aqualink RS4 to install a 4-speed pump controlled by relays and not RS485. This should be fun!
Hello from sunny SoCal
- Thread starter mattorola7
- Start date
- Apr 10, 2018
- 5,169
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45
Welcome to TFP!
I'm sure there are folks here that can help you out with your problem. Go ahead and post a new inquiry in the proper sub-forum. In the meantime, scroll down to the TFPwiki link and see if there's anything in there that might help you out.
www.troublefreepool.com
I'm sure there are folks here that can help you out with your problem. Go ahead and post a new inquiry in the proper sub-forum. In the meantime, scroll down to the TFPwiki link and see if there's anything in there that might help you out.
Jandy Aqualink RS - Further Reading
www.troublefreepool.com
Last edited:
- Jun 22, 2014
- 47,861
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Similar threads
