I like fixing my pool myself if I can. We have an in ground 12,000 gal gunite salt water pool with pebble tec and a spa. My granddaughters and I love to play in it. We have a heater, we use a DE. It is all Jandy equipment.
Thank you for asking. We came through the freeze just fine. One JVA chewed up the diverter valve insert. I contacted Jandy as they have been great in the past. They gave no advice, just call a pool guy. The pool guys were all busy fixing busted pipes so I changed the insert myself. The other JVA that controls the suction side is my current problem. I thought it was a bad actuator so I put on a new one and it is not moving either. I posted under actuator problem but no answers yet. If the actuator turns from the other board connection does that mean I need a whole new board? Any thoughts?
I did that and the intake slot is not sending the message to the actuator. I called Jandy and they said it was a programming problem and they would not walk me through it because I was not a licensed technicia.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!