I have a Hayward heater model HP21104T and it is leaking around the bottom pipe. They tell me I have to buy a new one,is this true. Thanks
Heater
- Thread starter B&C
- Start date
The pipe on the bottom is leaking , we tried to tighten and that did not work.So I heated it and it melted.My question is can you replace that whole center unit or do I need to buy a new heater?
- Jul 21, 2013
- 66,381
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Please show us pictures of the problem area and what you did.
What needs to be replaced and what is the cost for repair?
At 10 years old, I would not put a lot of money into the heater.
At 10 years old, I would not put a lot of money into the heater.
They can't make you buy a new one if you don't want to.
So, the answer is no, you do not have to buy a new one.
In any case, if you don't trust the service company's recommendation, you can always get a second opinion.
My question is can I buy just the middle section? Do you know where I can buy ? Thanks
- Jul 21, 2013
- 66,381
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Pictures are necessary to understand what parts you are talking about.
There is no part number for “middle section”.
Do they still the Hayward HP21104T heater ? If so where can I buy one or get parts ?
