Hey guys I just installed a hayward vsp. Somehow my neighbor that was helping got into the password enable menu. Not know what to do he just kept pushing buttons now its locked and stuck in low speed any ideas. Thanks
Hayward vsp password protected help
- Thread starter my83camaro
- Start date
-
- Tags
- hayward locked hayward
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
The factory default password is 1234.
If the password has been changed, it may be reset to factory default by pressing and holding the Speed 1 and Speed 4 buttons at the same time while powering on the drive, or by resetting all parameters in the Configuration Menu.
If the password has been changed, it may be reset to factory default by pressing and holding the Speed 1 and Speed 4 buttons at the same time while powering on the drive, or by resetting all parameters in the Configuration Menu.
Thank you very much I dont see that in my manual. I'm very unimpressed with the paper work that comes with the pump I bought. I bought a sp3202vsp. 1.85hp pump no flow chart or any info on it at all. My old 1hp super16 made more pressure than this thing full speed
TriStar VS 1.85HP
According to EPA ENERGY STAR® 3rd party test data, Hayward TriStar® VS variable speed pool pumps are the most energy efficient on the market.
hayward.com