Today I went to turn on the step jets after removing the plugs and reinstalling the nozzle assemblies and water began flowing out of the air control knobs when I opened them to let air in. The knobs are located above the jet and above the water line. So, needless to say, there are no bubbles coming out of the jets.
I was thinking it had something to do with the paver installation but I just found a video after the pavers were installed last fall and they are working properly.
I have no idea how they are plumbed and I can’t believe I didn’t take a picture before the pb backfilled. If I remember correctly, there is one line coming from the pump and it tee’s off to go to both jets. I added a picture of the steps and the jet body I believe they installed.
Any thoughts on what may be wrong??
I was thinking it had something to do with the paver installation but I just found a video after the pavers were installed last fall and they are working properly.
I have no idea how they are plumbed and I can’t believe I didn’t take a picture before the pb backfilled. If I remember correctly, there is one line coming from the pump and it tee’s off to go to both jets. I added a picture of the steps and the jet body I believe they installed.
Any thoughts on what may be wrong??