Update:
Since cleaning the probe and rebooting the OmniLogic, ORP readings have been more consistent and fluctuate less. I’m beginning to think it was the probe cleaning that resolved the issue and not the reboot. In retrospect I should have cleaned the probes prior to installing the system and would suggest those who install in the future do the same. I also think If I had done that I would not have experienced the initial Ozonator issues.
I’ve also noticed that my FC range has tightened up and now Its between 2.5ppm and 3.5ppm which is much better than the 2-4ppm I was seeing prior. I’m also seeing ORP respond quicker when chlorine is dispensed.
Since cleaning the probe and rebooting the OmniLogic, ORP readings have been more consistent and fluctuate less. I’m beginning to think it was the probe cleaning that resolved the issue and not the reboot. In retrospect I should have cleaned the probes prior to installing the system and would suggest those who install in the future do the same. I also think If I had done that I would not have experienced the initial Ozonator issues.
I’ve also noticed that my FC range has tightened up and now Its between 2.5ppm and 3.5ppm which is much better than the 2-4ppm I was seeing prior. I’m also seeing ORP respond quicker when chlorine is dispensed.
Last edited: