Hayward Omni PL Board Wire Colors - Help Needed

[OntarioCanada]

Hi Al,

1. if anyone has the Omni PL system, could you please help me and check at the white 6 pin connector that plugs into the board from the Controller/LCD wire and please tell me which color wire is connected to which pin in the below picture at J1 connector? I have a controller but the wire is cut, I am trying to build the connector to plug into the board but don't know which colour wire goes into which pin.
2. in the 2nd and 3rd pic, there is a two pin power connector, I don't have that wire/connector, does anyone know which type of connector that is so I can find/buy it online? (doesn't look like Molex or AMP to me.

Thanks in advance.

 

[SunnyP2000]

Here is one pic you should be able to zoom in . let me know if it doesn't work i can open up and get more pics. i am sorry i dont know what kind of plug it is.

 

[OntarioCanada]

Thank you, I can see the wire Colors there for the controller. And after spending couple hours online I think I have identified the connectors and the pins. Now it’s time to order and see if everything will fit.

 

[OntarioCanada]

Got one connection done (for the display/controller, it’s JST XH connector with 6 pins), waiting for the other one to arrive for the power from breaker (it’s Molex 50-84-1025 with female pins)

 

[SunnyP2000]

thats great. how did it get cut in first place?

 

[OntarioCanada]

thats great. how did it get cut in first place?

That’s how I got it from someone who sold it to me. I got both connectors now, will swap out the prologic with this on the weekend and see how things go. Looking to add internet connectivity so I can turn ON and off things like heater remotely.

 

[SunnyP2000]

That’s how I got it from someone who sold it to me. I got both connectors now, will swap out the prologic with this on the weekend and see how things go. Looking to add internet connectivity so I can turn ON and off things like heater remotely.

oh great i am hoping you got it at deep discount. wireless on Omnipl unit is better then more expensive omni logic unit so definitely great for automation, i have had it for about a year so far so good.

 

[OntarioCanada]

oh great i am hoping you got it at deep discount. wireless on Omnipl unit is better then more expensive omni logic unit so definitely great for automation, i have had it for about a year so far so good.

I think I got ok deal but only if it works properly, I have some doubts because of the wire being cut and one connector missing but lets see if it comes through when I connect everything. I will update here. thank you for sharing the pictures from your unit and your feedback about the wireless.

 

[OntarioCanada]

Never mind, I checked prologic and will use same gauge