I have a Hayward low salt unit with a t5 cell.
when I power the unit on I get a low salt check cell lights. This happens on multiple cells. I have a reading of 600 for salt and then it slowly lowers over time. Salt is tested at 1800 (in range with low salt unit). Thermistor reads at 2.5 when at room temp and lowered when warmed with a hair dryer to 1.5ohms. K1 and k2 both look to have good solder joints. Any ideas on what to look at next.
when I power the unit on I get a low salt check cell lights. This happens on multiple cells. I have a reading of 600 for salt and then it slowly lowers over time. Salt is tested at 1800 (in range with low salt unit). Thermistor reads at 2.5 when at room temp and lowered when warmed with a hair dryer to 1.5ohms. K1 and k2 both look to have good solder joints. Any ideas on what to look at next.
