Hayward Aquatrol being tricky

[HeidiP]

Finally temperature is up high enough in Ottawa for this thing to work - I have cleaned my cell and replaced it and I get all sorts of numbers flashing.

I can't find the guide to tell me if numbers run in order -
I also get the no flow / low flow signal but this goes off.

Is there a standard startup procedure for these? Using liquid chlorine while I wait to get up and running.
I have read the guide. Can't figure this out.

 

[JamesW]

Probably need to reset the display board.

 

[HeidiP]

Thanks - that would make sense - it's doing weird things but sometimes it says no flow etc and sometimes it seems fine - seems to be generating since my chlorine goes up with it and i'm not using liquid right now...

 

[JamesW]

It's easy to do. Here's a video about replacing the display. Same process to remove and reinstall.

How To: Replace an AquaRite Display PCB - YouTube