Hayward AquaNat keeps getting stuck on drain.

Sep 6, 2021
17
Clovis, CA
Pool Size
10928
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Truclear / Ei
Our Hayward pool cleaner keeps getting hung up on either of the drains at the bottom. I thought it was because the leader hose that connects to it was cracked, but the same problem is still happening when I replaced the leader hose. It never got stuck in the first year we had it. Any advice?
 
Our Hayward pool cleaner keeps getting hung up on either of the drains at the bottom. I thought it was because the leader hose that connects to it was cracked, but the same problem is still happening when I replaced the leader hose. It never got stuck in the first year we had it. Any advice?
There should be a "bump" on each tire that will lift the cleaner away from the drain cover if it is stuck by suction. If the "bump" isn't there, it is time for new tires.
1704403136054.png
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.