So I installed a new Aqua Trol HP on the system per the directions. Its been a drawn out installation of sand filter system on intex 18' x 48" pool. All hard plumbed PVC and flex pipe. The filter's been working great for couple of weeks. Finally got the water right. CYA, Total Alkalinity, PH, and salt after much rain! So today, I hooked up the unit with the cell cable and flow switch jack. I followed all the directions that was provided, which wasn't much btw. Grounded the pump and the Aqual Trol to ground rod as well. After all was checked out, I put the power cable on. And the LCD screen showed weird numbers. The power light came on. The timer worked after setting. The pump started pumping once on fully on (not timer yet) Just wanted to run manual to all checked out. So the diagnostic button did not work, did not clear the weird number on the screen. Powered off and back on. Still there. Nothing on diagnostic button works like if you press you are supposed to get other menu items of checks. Rechecked all wires, cables, and setup. All fine.
So is this thing DOA? I hate that. Its brand new out of the box! Is there a reset switch or something I am not doing? I am attaching of pic of the weird numbers on the screen. It is the numbers 29 a decimal and parts of two other numbers or letters.
- - - Updated - - -
sorry. but pics on Mac look normal then you upload and they are upside down. argh.
- - - Updated - - -
btw, it hasn't had time to register salt yet. Its on now and not doing anything but showing the weird screen.
So is this thing DOA? I hate that. Its brand new out of the box! Is there a reset switch or something I am not doing? I am attaching of pic of the weird numbers on the screen. It is the numbers 29 a decimal and parts of two other numbers or letters.
- - - Updated - - -
sorry. but pics on Mac look normal then you upload and they are upside down. argh.
- - - Updated - - -
btw, it hasn't had time to register salt yet. Its on now and not doing anything but showing the weird screen.