figured out the odd numbers. it was reading in PPT, just like adjusting other things by clicking up to super chlorinate and back changed 4.2 to 4200
Hayward aqua-rite
- Thread starter parisdpm
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
I hate to bring this up again, but despite trying 2 boards, I still am getting a much higher reading on the salt than is actually in pool. I've taken samples to 2 diff pool stores, and tried some steps, reading 27--2800. My hayward keeps telling me 3300-3500. Instant reading about the same. I've tried the calibration, but it goes right back to higher levels. ps: cell is less than 30 days old.
Check all the readings and then move the switch to off for a minute and then back to auto and recheck the readings and then one more time.
Because its not high. Only the hayward says its high. test strips and 2 pool stores confirm low. Here is my main question: does the hayward read salt, or TDS? If I have borax in pool, isn't it reading that along with phosphates?
The Aquarite does not measure salt or TDS. It measures the performance of the cell, which depends on the chloride level.
Did you get the readings?
Did you get the readings?
What are all of the readings in both polarities?
You should get a K-1766 salt test kit.
You should get a K-1766 salt test kit.
Last edited:
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.