I am looking for some pictures of hard plumbing setups people have done with there intex style pools with a hayward skimmer and an intex pump. I am especially looking for vacuum hook ups.
Hello folks - I want hard plumb my intex 18' round x 52" AGP and use 1.5" pvc. I just upgraded to an intex 3,000 gph intex pump/sand filter. It appears that a standard 2" pvc female threaded to slip fitting will screw right onto the "out" port on the intex pump (see pics attached). I'm...
i would like to start off by saying that this was my first pool ever and definatly the first time leveling the ground for a pool....whew!!!!! i started off by doing all the normal installation routine ie removing the sod and cutting down the high side to meet the low side, brung in 3 tons of...
Decided to install my Hayward through wall and go ahead and do SOME of the hard plumbing while I was at it. This is still not the final product as I will relocate the filter/pump in the future and hopefully I have left myself a way to do that :) With the Hayward I started by placing it as high...
*****EDIT - Just finished the job, SEE MY LAST POST for pics and parts list.************** I was encouraged by the other thread in this forum regarding hard plumbing my setup. I don't mean to ask to be spoon fed, but I am not a plumber by any means. I know how to prepare, prime, and glue pvc...
Hey everyone, I have been busy this summer but I was able to conduct a easy experiment this summer... I would like to thank Don @circupool from Welcome to Discount Salt Pool - Saltwater Chlorine Generators - Chlorinators I bought the SWG from him for this experiment. SWG: Circupool SJ20...
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!