Goldline board repair

[Freeze62]

Hi Guys, I'm new here. Happy i found this place!
I have a burned out In-rush current limiter "RZ3" on a Goldline board p.n. G1-066012C.
trying to find it's specs so I can replace it.
The rest of the board looks good, i mean , not overheated.
I was also gonna buy an aftermarket cell to replace a T15, should i stick to OEM?

 

[1poolman1]

Hi Guys, I'm new here. Happy i found this place!
I have a burned out In-rush current limiter "RZ3" on a Goldline board p.n. G1-066012C.
trying to find it's specs so I can replace it.
The rest of the board looks good, i mean , not overheated.
I was also gonna buy an aftermarket cell to replace a T15, should i stick to OEM?

you can't go wrong with an OEM cell.

https://www.digikey.com/en/products/detail/ametherm/SL32%25202R025/363379?utm_adgroup=&utm_source=google&utm_medium=cpc&utm_campaign=PMax%20Shopping_Product_Medium%20ROAS%20Categories&utm_term=&utm_content=&utm_id=go_cmp-20223376311_adg-_ad-__dev-c_ext-_prd-363379_sig-EAIaIQobChMIl7WhpsTrhwMVtwqtBh2Pxhf9EAQYASABEgLlffD_BwE&gad_source=1&gclid=EAIaIQobChMIl7WhpsTrhwMVtwqtBh2Pxhf9EAQYASABEgLlffD_BwE

 

[drknapp]

Here's what I used for the thermistor when I had to repair ours:

Amazon.com

 

[Freeze62]

Great!
Thanks a lot for such a fast response guys!
I ordered the part already!

 

[johnnydot]

Here's what I used for the thermistor when I had to repair ours:

Amazon.com

this is what I used, more heavy duty than the ones you used

(2-Pack) Inrush Current Limiters, Thermistor 32mm 2ohms 25A for Aquarite Chlorine Generator Board or Hayward Swimpure System Board​