Gizzmo with blow out plug

[gamorg02]

Hi all! Question on gizzmos with the blow out plugs. We got crazy amount of rain (instead of snow) the past few weeks and water level was about 1" above the gizzmos. Lowered the water and pulled the black plug on top and see water in the gizzmo center when I assume means water is back in the skimmer line. Has anyone ran into this or know how to seal that plug as it's just plastic on plastic.

Thanks in advance!

 

[Bperry]

Hi all! Question on gizzmos with the blow out plugs. We got crazy amount of rain (instead of snow) the past few weeks and water level was about 1" above the gizzmos. Lowered the water and plugged the black plug on top and see water in the gizzmo center when I assume means water is back in the skimmer line. Has anyone ran into this or know how to seal that plug as it's just plastic on plastic.

Thanks in advance!

The cap should be very tight friction fit and waterproof. Sounds like you may need to blow out the lines again unless it was just a little bit of water

 

[gamorg02]

The cap should be very tight friction fit and waterproof. Sounds like you may need to blow out the lines again unless it was just a little bit of water

Thanks for the info - I see water in the gizzmo center so I'm going to resolve ASAP, as I'm not sure how water could be that high in the gizzmo and not filled the lines but will find out in the morning!