New to forum as new pool owners. We recently had a leaking pipe to a return jet repaired in a pool only a few months old. Now the liner is floating on that side- only with the pump running. Once pump turned off, liner returns to normal. We have received little rain. We do see a hairline crack in return jet of pipe that was repaired but doubt it is leaking enough to cause the liner to float. Any advice?
Floating liner with pump running
- Thread starter tessley
- Start date
- Jun 22, 2014
- 51,375
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
I would call that company back as soon as possible if they still warranty their work. That sounds like a classic pressure side leak and it can really cause some problems over time if allowed to continue. Do what you can to convince the repair company that something obviously wasn't corrected properly and they need to return ASAP. Keep us posted, good luck.
I would call that company back as soon as possible if they still warranty their work. That sounds like a classic pressure side leak and it can really cause some problems over time if allowed to continue. Do what you can to convince the repair company that something obviously wasn't corrected properly and they need to return ASAP. Keep us posted, good luck.