First time SLAM

[violet-mermaid]

Hi! I am trying to access the SLAM article and it keep sending me to the home page. This is happening with most articles that I try to access. Is there something I need to do to resolve this or is it an issue with the app?

Can someone let me know what I need to do to SLAM? My water is clear, but the bottom feels slimy and there looked to be a few small patches of dirt/algae when I got in to brush today. FC was at 0.5, I added liquid chlorine and about to test all numbers.

Thanks!

 

[mknauss]

Try clearing the cache and re sign in to TFP. Seems to occur most often with chrome or edge browser.

 

[mknauss]

For SLAM Process, lower pH to 7.2. Add LC to get to 40% of your CYA level. Maintain that as often as possible.

 

[violet-mermaid]

Thank you so much!!!!

 

[violet-mermaid]

For SLAM Process, lower pH to 7.2. Add LC to get to 40% of your CYA level. Maintain that as often as possible.

Here are my numbers now:

Cl- 5.5
PH- 8.2
CYA- 35
TA- 120

Do I add muriatic acid tonight then up the chlorine to 14 tomorrow?

 

[mknauss]

Do both now. Add acid to lower to 7.2. Run pump 30 minutes and test. Add more acid if not close to 7.2. Then add chlorine to get to 16 ppm FC.

 

[violet-mermaid]

Do both now. Add acid to lower to 7.2. Run pump 30 minutes and test. Add more acid if not close to 7.2. Then add chlorine to get to 16 ppm FC.

You’re a lifesaver, thanks!!!