Hello everyone. I’ve been reading a lot lately but figured I would finally join and contribute. We are in the middle of building an in ground vinil liner pool with a spill over in ground spa. Equipment list:
-Hayward OmniPL with TCELL940 (15) and expansion board
-Hayward Swimclear C5030
-Hayward Tristar VS900
-Raypak X94 heater
-Jandy never lube valves
-Hayward GVA24
-Hayward colorlogic lights (Omni direct)
-pH monitoring
My goal is to run 24/7 at the correct rpm and will look to optimize things as I go/learn. So far the plan is to automate all water features, pool/spa lineups and dual heater set points for pool and spa. We want to be able to use the spa year round, so the spa shell will be insulated as well as underground spa pipes. We’re just now setting the spa in place, so there’s still a lot left. Glad to have finally joined.
-Hayward OmniPL with TCELL940 (15) and expansion board
-Hayward Swimclear C5030
-Hayward Tristar VS900
-Raypak X94 heater
-Jandy never lube valves
-Hayward GVA24
-Hayward colorlogic lights (Omni direct)
-pH monitoring
My goal is to run 24/7 at the correct rpm and will look to optimize things as I go/learn. So far the plan is to automate all water features, pool/spa lineups and dual heater set points for pool and spa. We want to be able to use the spa year round, so the spa shell will be insulated as well as underground spa pipes. We’re just now setting the spa in place, so there’s still a lot left. Glad to have finally joined.
