I’m new to this site and 1st time Pool owner. I had pool set up and it’s not level. I have been draining for 2 1/2 days. I bought 7X7 pavers to set legs on once drained.. any advice.. I’m so frustrated and have spent so much on this whole ordeal.
First time pool owner
- Thread starter ddeleon66
- Start date
- Jul 3, 2013
- 9,027
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
Welcome to TFP 
You can use a water level and it will make the entire pool level with ease
You can use a water level and it will make the entire pool level with ease
The leveling really is the hardest part. Scrape the site down to the lowest level, then sink your pavers to be even with the surface. Check level of each paver, make adjustments as needed.
- Jun 22, 2014
- 52,034
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
Hang in there, it will be worth it.
www.troublefreepool.com
Hang in there, it will be worth it.
Pool Care Basics Archives
Your one-stop shop for all things TFP to include: ABCs of Water Chemistry, Recommended Chemicals/Levels, Test Kits, Troubleshooting, and much more!
www.troublefreepool.com
- Jun 22, 2014
- 52,034
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus