Good Day!
After reading through several posts and articles, I purchased the TF test kit, which arrived yesterday. We opened our pool on 4/8. With test strips, all seemed OK, except the CYA and I noticed as I added some, the measurement did not change. So I decided to stop adding stabilizer and wait for the kit to arrive.
I have just finished the first round of tests:
FC- 4ppm (so I'm thinking I need to add some bleach)
CC- 0.5ppm
CH- 50ppm (we have a vinyl liner in our above ground pool)
TA- 80ppm
CYA- 90ppm! (see....I knew it! So now is it too high?)
Thank you so much!
After reading through several posts and articles, I purchased the TF test kit, which arrived yesterday. We opened our pool on 4/8. With test strips, all seemed OK, except the CYA and I noticed as I added some, the measurement did not change. So I decided to stop adding stabilizer and wait for the kit to arrive.
I have just finished the first round of tests:
FC- 4ppm (so I'm thinking I need to add some bleach)
CC- 0.5ppm
CH- 50ppm (we have a vinyl liner in our above ground pool)
TA- 80ppm
CYA- 90ppm! (see....I knew it! So now is it too high?)
Thank you so much!