The cost of having a pool service open and close our pool is very expensive so I have decided to do it on my own. I watched the guys who opened and closed the pool a few times but still uncertain about one thing. The pool has a Paramount 6 port gear valve module and the pool service removed the top with the gears in it. Do I just place the head back on or is there something else I should do?
First time opening pool
- Thread starter navychief8425
- Start date
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
@proavia is our IFCS expert.
Were any pipes plugged? Remove any plugs before replacing the head.
See Closing Pool for Winter - Further Reading
www.troublefreepool.com
@proavia is our IFCS expert.
Were any pipes plugged? Remove any plugs before replacing the head.
See Closing Pool for Winter - Further Reading
In Floor Cleaning Systems - Further Reading
www.troublefreepool.com
- Feb 6, 2015
- 7,807
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Most of the time when a pool with an IFCS is winterized, the lines to the infloor popup lines are also blown out.
Plugs similar to the pic Allen @ajw22 posted are placed in the water distribution valve when the IFCS lines areblown out..
Post a pic of the inside of your water distribution valve.
Plugs similar to the pic Allen @ajw22 posted are placed in the water distribution valve when the IFCS lines areblown out..
Post a pic of the inside of your water distribution valve.