- Apr 2, 2021
- 3
- Pool Size
- 12000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
FC-7.5
CC-0
pH-8.2
TA-120
CYA-60
Salt-3600
I have been running my SWG during the day as per recommended here and I did this test 30 minutes after the daily 10 hour run (60% output, so 6 hours generation). I am still very new, but this site has been very informative, so I haven’t quite dialed in my chlorine loss and SWG output levels yet. From what I’ve read I think my next steps are to add acid, bringing down pH and TA. My questions are:
1. Do I add only enough acid to come down to 7.2 pH, let pH climb to normal, check TA and repeat process to target?
2. Do I need to add aeration, other than SWG, to increase pH after acid?
CC-0
pH-8.2
TA-120
CYA-60
Salt-3600
I have been running my SWG during the day as per recommended here and I did this test 30 minutes after the daily 10 hour run (60% output, so 6 hours generation). I am still very new, but this site has been very informative, so I haven’t quite dialed in my chlorine loss and SWG output levels yet. From what I’ve read I think my next steps are to add acid, bringing down pH and TA. My questions are:
1. Do I add only enough acid to come down to 7.2 pH, let pH climb to normal, check TA and repeat process to target?
2. Do I need to add aeration, other than SWG, to increase pH after acid?