- Jun 16, 2021
- 661
- Pool Size
- 25500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
My TF100 arrived today and I now have real numbers to work from. I also did a test on my fill water, but didn't remember if there's a place to store that info in the app, or if I should just keep that in mind and recheck from time to time.
Pool Water:
FC: 7.5ppm
CC: 0 (it MIGHT have been 0.5 fhe first time, but tried it again and 0)
CYA: 52
PH: 7.5
TA: 140 (my well water numbers exploded my brain)
CH: 300
Temp: 80
CSI: 0.1
Well Water:
CH: 150-175, tested twice and thought it was one more drop the second time.
TA: 240! That's why my pool's TA went thru the roof after the CYA drains.
pH: 7.6
I'm going to slowly increase CH and salt levels over time... SWG is ordered and I'm waiting to see the tracking number before I let myself get REALLY excited.
Looks like my next action is dump some more MA into the pool and aerate.
Pool Water:
FC: 7.5ppm
CC: 0 (it MIGHT have been 0.5 fhe first time, but tried it again and 0)
CYA: 52
PH: 7.5
TA: 140 (my well water numbers exploded my brain)
CH: 300
Temp: 80
CSI: 0.1
Well Water:
CH: 150-175, tested twice and thought it was one more drop the second time.
TA: 240! That's why my pool's TA went thru the roof after the CYA drains.
pH: 7.6
I'm going to slowly increase CH and salt levels over time... SWG is ordered and I'm waiting to see the tracking number before I let myself get REALLY excited.
Looks like my next action is dump some more MA into the pool and aerate.
Last edited: