Hello to all. I purchased my home back in late summer last year. I’m located in Long Island New York. House came with a 8800 gallon above ground pool. The water in pool was toxic green until a few week ago when I drained the whole pool and ripped out the vinyl liner. I ordered liner and ordered new filter as well as new pump. Already received my Taylor k-2006 kit. Going to start setting up the pool in the next week or so but want to make sure I have everything ready to go. I plan on mainting my Pool with your trouble free method. Plan on using 10% pool chlorine or 6% bleach to maintain FC. Standard arm & hammer for TA and not sure yet about what to you use for PH yet. Ash or borax.
I just want your help to make sure I do the steps right and start off this pool the correct way.
First I plan on filling pool. Of course put liner in first. Lol. After it’s full I believe I should get the PH in check. After PH I should adjust the TA to right levels. Then I’m not sure. I read both ways but what is better. Do I adjust FC next or should I adjust CYA first? Or is my order all off?
Any advise would be helpful.
I just want your help to make sure I do the steps right and start off this pool the correct way.
First I plan on filling pool. Of course put liner in first. Lol. After it’s full I believe I should get the PH in check. After PH I should adjust the TA to right levels. Then I’m not sure. I read both ways but what is better. Do I adjust FC next or should I adjust CYA first? Or is my order all off?
Any advise would be helpful.