I don’t know how to share my logs from the app but here are my results from my test. Test performed with TF-100 kit.
Ph - 8.2
FC - 2.5
CC - 0
TA - 50
CH - 350
CYA - <20
Based on the app here’s what I did, tell me where I messed up.
I added 1 cup with an extra little glug of chlorine to get the chlorine up to 3. This is brand new plaster so I’m scared to go higher than that for the time being.
Then I added 3 cups of acid to bring the PH down to ~7.4 which the installer recommends for the new plaster.
Ph - 8.2
FC - 2.5
CC - 0
TA - 50
CH - 350
CYA - <20
Based on the app here’s what I did, tell me where I messed up.
I added 1 cup with an extra little glug of chlorine to get the chlorine up to 3. This is brand new plaster so I’m scared to go higher than that for the time being.
Then I added 3 cups of acid to bring the PH down to ~7.4 which the installer recommends for the new plaster.
Last edited: