Did my first test today using the Taylor K2006 kit. I also received my TF-100 kit yesterday, so I'm going to use that tomorrow.
These are the results:
Water Temp- 71F
Free Chlorine- 6.0
Total Chlorine- 7.2
Cyanuric Acid- 90
PH- 8.0 (acid demand test was 2 drops to get to 7.6)
Calcium Hardness- 240
Total Alkalinity 140
CSI 0.36 (per PoolMath app)
Prior owner was using stabilized chlorine tablets (I'm guess that's why the CYA is on the high side).
There is some scaling on the tiles that does not scrub off easily.
Looks like I need to add some chlorine this evening, 133 ounces per PoolMath. Should I also try to lower the PH? What about the Alkalinity?
Thanks!
These are the results:
Water Temp- 71F
Free Chlorine- 6.0
Total Chlorine- 7.2
Cyanuric Acid- 90
PH- 8.0 (acid demand test was 2 drops to get to 7.6)
Calcium Hardness- 240
Total Alkalinity 140
CSI 0.36 (per PoolMath app)
Prior owner was using stabilized chlorine tablets (I'm guess that's why the CYA is on the high side).
There is some scaling on the tiles that does not scrub off easily.
Looks like I need to add some chlorine this evening, 133 ounces per PoolMath. Should I also try to lower the PH? What about the Alkalinity?
Thanks!