New pool, initially had CYA of 0 and FC 1-2, with running SWG almost all the time at 100%.
I added CYA-stablizer (about 2/3 the recommended amt per pool math) and 2 days later my CYA level was 20, but my FC with up to 20 also!
Still very high after cutting back the time and % on the SWG and so I turned in off for 2.5 days, and now it is at around 6-7.
I turned the SWG back on to 60% 12 hours a day.
pH is around 7.8 (had been higher but came down without me adding anything).
Question - is my next step to add more CYA to get that level up to 60? Am I correct in thinking that will raise my FC higher and I will need to cut back further on the run time/percent with my SWG?
Is it better to cut back on the run time for the SWG or the %?
I added CYA-stablizer (about 2/3 the recommended amt per pool math) and 2 days later my CYA level was 20, but my FC with up to 20 also!
Still very high after cutting back the time and % on the SWG and so I turned in off for 2.5 days, and now it is at around 6-7.
I turned the SWG back on to 60% 12 hours a day.
pH is around 7.8 (had been higher but came down without me adding anything).
Question - is my next step to add more CYA to get that level up to 60? Am I correct in thinking that will raise my FC higher and I will need to cut back further on the run time/percent with my SWG?
Is it better to cut back on the run time for the SWG or the %?