So this has become an annual nuisance in recent years, but since we have so few really cold nights in SoAZ, I've been living with it. I am thinking about bringing in a pro soon though, but before I do I thought I'd post here for any comments/suggestions:
As night-time temps creep below about 40 F, my EasyTouch will switch from pool to spa mode. My pool runs from 2:00am until 8:00pm daily and I am typically starting my day around 6:00am, which is when I notice the switch has happened on cold mornings. Using the ScreenLogic app, if I then switch the mode from spa back to pool, it will usually stay, but usually within 5-10 min will revert back to spa mode. Curiously, when the system has switched to spa mode, the heater is (fortunately) not activated. If I do nothing, the EasyTouch will eventually switch back to pool mode on it's own....as morning temps increase by around 5-10 degrees.
Anyone seen something similar to this?
As night-time temps creep below about 40 F, my EasyTouch will switch from pool to spa mode. My pool runs from 2:00am until 8:00pm daily and I am typically starting my day around 6:00am, which is when I notice the switch has happened on cold mornings. Using the ScreenLogic app, if I then switch the mode from spa back to pool, it will usually stay, but usually within 5-10 min will revert back to spa mode. Curiously, when the system has switched to spa mode, the heater is (fortunately) not activated. If I do nothing, the EasyTouch will eventually switch back to pool mode on it's own....as morning temps increase by around 5-10 degrees.
Anyone seen something similar to this?