My daughter has a pool/spa system with one heater to switch between the two. At some point the remote died.. no display. They also had a symptom of the heater running for only a few minutes then switching off for a minute and recycling. I found a YouTube video of this exact symptom. The test was to bypass the two manifold sensors to see if the heater stayed on. This worked for us. I replaced the 2 sensors along with a leaky water pressure switch. We ran the system for two days with no problems .. spa is now useable.
The problem now is finding the most economical option for getting the remote control functionality back. The unit UOC is 2.140, boot is 1.010 on the non-legacy panel.. suggestions please..
The problem now is finding the most economical option for getting the remote control functionality back. The unit UOC is 2.140, boot is 1.010 on the non-legacy panel.. suggestions please..
