Easy touch and heater

[whitemok]

Where do I get this wire? See pic

 

[ajw22]

I believe that is just regular 2 wire low voltage wire that connects to the heater fireman’s switch.

 

[Jimrahbe]

WM,

Allen is spot on with his advice... Door bell cable or any low voltage cable should work just fine.

Thanks,

Jim R.

 

[JamesW]

Door bell cable or any low voltage cable should work just fine.

That way you can tell when someone is at the front door when the heater starts.

 

[whitemok]

So I run the wire from the heater to the control panel? I have an easy touch pentair.

 

[JamesW]

Correct, the heater should have a connection described in the manual.

What heater do you have?

 

[whitemok]

Correct, the heater should have a connection described in the manual.

What heater do you have?

Sta rite

 

[whitemok]

Sta rite

 

[JamesW]

You should be able to connect the wire to the fireman's switch as described in the manual.