What is this connection? I have had my pool for 20 years and never thought about it. But what is it?
dumb question...what is this?
- Thread starter shorembo
- Start date
TexEdmond
Gold Supporter
- Jun 16, 2021
- 661
- Pool Size
- 25500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Mine has the same thing but no plug covering it. My best guess is it's a return or suction that they installed when they did the gunite, but capped off so they could install something later and not have to drill and patch for watertightness later, but still charge me an arm and a leg for basically just a few feet of PVC and a valve.
- Feb 6, 2015
- 7,807
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
If on a vertical surface, it's probably a suction line for a vacuum.
If on a horizontal surface, maybe an umbrella holder.
Are there any pipes at the equipment pad that aren't connected to the system? Or possibly one marked vacuum or cleaner that you don't use? Show us a pic of your equipment pad including all pipes.
If on a horizontal surface, maybe an umbrella holder.
Are there any pipes at the equipment pad that aren't connected to the system? Or possibly one marked vacuum or cleaner that you don't use? Show us a pic of your equipment pad including all pipes.
- Nov 7, 2018
- 1,049
- Pool Size
- 14000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Is there one on the other side? We have something similar and it's for the "stay out of the deep area" rope.
Its the only plug and it is on the side wall of the pool. I seem to remember something about a temporary outlet mentioned by the pool builder.
TexEdmond
Gold Supporter
- Jun 16, 2021
- 661
- Pool Size
- 25500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Does it suck or blow water when you take that plug out? Like mentioned above, have you noticed any mystery valves that don't seem to do anything?
Just checked and neither sucking or blowing. Also, the pool equipment has no mystery pipes or deadends... just the skimmer, drain, and return.
I think you are right that it is a placeholder pipe for some future work. I never thought much of it. The pool is from 2002 and I think I was hoping it was a return for a cleaner but since no suction.... I guess not without some extra work.
Thanks for the responses.
I think you are right that it is a placeholder pipe for some future work. I never thought much of it. The pool is from 2002 and I think I was hoping it was a return for a cleaner but since no suction.... I guess not without some extra work.
Thanks for the responses.
Similar threads
