I am always a little nervous reaching into the timer box to change settings with the two 110v hookups exposed. Does anyone have a double pole switch to cut off all power to your pool setup without throwing the breakers? Mine are inside and a little trek away from my pool equipment.
Double pole switch before timer
- Thread starter Excedrin
- Start date
Ex,
There should be a little cardboard shield that covers the 240 VAC connections..
If not there, you can just cut a piece of plastic and use it as a shield.
Thanks,
Jim R.
There should be a little cardboard shield that covers the 240 VAC connections..
If not there, you can just cut a piece of plastic and use it as a shield.
Thanks,
Jim R.
Well, there’s not 
. Bought the house 12 years ago and it wasn’t there then either. The timer box is half broken anyway. Maybe I’ll just replace it. I will probably be running the pump/swg 24/7 so it probably doesn’t matter what I get. Are any better than others?
. Bought the house 12 years ago and it wasn’t there then either. The timer box is half broken anyway. Maybe I’ll just replace it. I will probably be running the pump/swg 24/7 so it probably doesn’t matter what I get. Are any better than others?